Pro HT

Pro HT

Pro HT

Pro HT is suitable for both on-wall and in-wall installations. The small depth makes it easy to use together with projector screens or in places where the use of big floor speakers is limited.

A high sensitivity, power of a professional speaker and the sound of a High-End system makes these loudspeakers unique.

For the best reproduction of low frequencies a sealed enclosure with thick walls is used. This gives very good dynamics and a well-controlled tight bass for the system, but also eases the use of an additional subwoofer. The symmetrical construction makes the system universal – it can be used as a right, left or centre loudspeaker. This construction also minimises the side reflections from walls and the floor, which is very important in big rooms.

The system has a correction switch for the sound. The suggested positions are ‘O’ for on-wall and ‘I’ for in-wall. The system is equipped with decorative grill. If needed, a special fastening system is offered for an on-wall installation.

Technical Specifications

Nominal impedance

4 Ω

Max. long-term power

250 W

Max. short-term power

400 W

Frequency range (±2 dB)

72–20000 Hz

Lf corner (−6 dB)

54 Hz

Crossover frequency

500/2500 Hz

Sensitivity (2.83 V/1 m)

92 dB

Speaker drivers

2 × 8" paper cone woofer. Designed & manufactured by Audes;

2 × 5" paper cone mid-woofer;

1" fabric dome tweeter.

Dimensions (mm)

1444 H × 356 W × 102 D

Grill On-Wall

1444 H × 356 W × 12 D

Grill In-Wall

1520 H × 432 W × 12 D

Dimensions (inches)

56⅞" H × 14" W × 4" D

Grill On-Wall

56⅞" H × 14" W × ½" D

Grill In-Wall

59⅞" H × 17" W × ½" D


22 kg/49 lbs


The standard finish for Pro HT is black paint.