Pro HT is suitable for both on-wall and in-wall installations. The small depth makes it easy to use together with projector screens or in places where the use of big floor speakers is limited.
A high sensitivity, power of a professional speaker and the sound of a High-End system makes these loudspeakers unique.
For the best reproduction of low frequencies a sealed enclosure with thick walls is used. This gives very good dynamics and a well-controlled tight bass for the system, but also eases the use of an additional subwoofer. The symmetrical construction makes the system universal – it can be used as a right, left or centre loudspeaker. This construction also minimises the side reflections from walls and the floor, which is very important in big rooms. Audes’s own-made 8″ paper cone drivers for the bass, the 5″ paper cone mid-woofers and the 1″ fabric dome tweeter (enhanced with a horn) from SEAS, Norway are used. The same set of drivers is also used in Audes’s High-End series Excellence.
The system has a correction switch for the sound. The suggested positions are ‘O’ for on-wall and ‘I’ for in-wall. The system is equipped with decorative grill. If needed, a special fastening system is offered for an on-wall installation.
Max. long-term power
Max. short-term power
Frequency range (±2 dB)
Lf corner (−6 dB)
Sensitivity (2.83 V/1 m)
2 × 8" paper cone woofer. Designed & manufactured by AUDES;
2 × 5" paper cone mid-woofer by SEAS;
1" fabric dome tweeter by SEAS.
1444 H × 356 W × 102 D
1444 H × 356 W × 12 D
1520 H × 432 W × 12 D
56⅞" H × 14" W × 4" D
56⅞" H × 14" W × ½" D
59⅞" H × 17" W × ½" D
22 kg/49 lbs
The standard finish for Pro HT is black paint.